Ashleigh & Burwood Use & Care – Collectables
CollectablesCollectablesCollectables
{{block type="ultraslideshow/slideshow" template="infortis/ultraslideshow/slideshow.phtml" slides="ash_bur_category_slide_1,ash_bur_category_slide_2" timeout="10000"}}

 

How To Use Your Ashleigh & Burwood Fragrance Lamp

  1. Carefully Remove the lamp and the funnel from the box.
  2. Carefully Remove the decorative lid, the snuffer cap and the wick stone assembly.
  3. Using the funnel, pour the fragrance of your choice into the lamp, fill up to two thirds, making sure an air gap is left so the air can circulate and the catalytic process to work.
  4. Replace the wick stone assembly and cover with the snuffer cap.
  5. Place your lamp on a flat, fire resistant surface and allow the wick to absorb the fragrance for about 20 to 30 minutes.
  6. When your ready to use your lamp remove the snuffer cap and light the stone assembly safely until the flame reduces in size, this should take about 2-4 minutes.
  7. Gently blow out the flame and put the decorative lid on the lamp once the flame is completely extinguished.
  8. Allow the lamp about 30 minutes as this should be enough time to fill an average sized room with the scent.
  9. Once you have finished using the lamp carefully place the snuffer cap back onto the lamp and this will stop any circulation of air into the lamp.
  10. Once primed you can relight the lamp at any time.
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist